Grundfos three-phase horizontal multistage centrifugal pump CM-I 10-5 cod. 98979299
Grundfos three-phase horizontal multistage centrifugal pump CM-I 10-5 cod. 98979299
Useful to:
- Air conditioning - Commercial buildings
- Pressure Boost - Commercial Buildings
- Increased water pressure for domestic use
- District heating
- Irrigation
- Desalination
- Industrial heating
- Washing and cleaning
- Industrial water supply
- Community water supply
- Water distribution
The CM model is a reliable, silent and compact horizontal suction pump. The modular design of the pump facilitates the creation of customized solutions. Available in cast iron and stainless steel.
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
Grundfos three-phase horizontal multistage centrifugal pump CM-I 10-5 cod. 98979299
Model: CM 10-5 ARIE-AQQE FAAN
Compact, reliable, horizontal, multi-stage centrifugal pump, with radial suction port and discharge port.
The shaft, impellers and chambers are made of stainless steel.
The inlet and outlet parts are made of cast iron.
The mechanical seal is a special type, unbalanced O-ring.
The piping connection is via Whitworth, Rp (ISO 7/1) internal threads.
The pump is equipped with a 3-phase asynchronous motor, air-cooled, mounted on support feet.
| TECHNIQUES | |
|---|---|
| Pump speed on which the pump data is based | 2900 rpm |
| Nominal flow rate | 10 m³/h |
| Nominal prevalence | 64.88 m |
| Impellers | 5 |
| Code for shaft seal | AQQE |
| Approvals | CE, EAC, UKCA |
| Drinking water approvals | WRAS, ACS, NSF61, UBA |
| Curve tolerance | ISO9906:2012 3B |
| Pump version | TO |
| Model | TO |
| MATERIALS | |
|---|---|
| Body Pump | Stainless steel, EN-1.4301, AISI 304 |
| Impeller | Stainless steel, EN 1.4301, AISI 304 |
| Material code | THE |
| Code for rubber | AND |
| INSTALLATION | |
|---|---|
| Ambient temperature limit | -20 .. 55°C |
| Max operating pressure | 16 bars |
| Max pressure at the mentioned temperature | 16 bar / 90°C - 10 bar / 120°C |
| Connection type | Rep |
| Size of the inlet connection | 11/2 inch |
| Size of the output connection | 11/2 inch |
| Exit position | 12 |
| Pump connection code | R |
| LIQUID | |
|---|---|
| Pumped liquid | Waterfall |
| Liquid temperature range | -20 .. 120°C |
| Liquid temperature during operation | 20°C |
| Density | 998.2 kg/m³ |
| ELECTRICAL DATA | |
|---|---|
| Standard engine | IEC |
| Structure dimensions | 100LC |
| Efficiency class IE | IE3 |
| Rated power - P2 | 3 kW |
| Network frequency | 50Hz |
| Usable for 50/60 Hz | No |
| Nominal tension | 3 x 220-240D/380-415Y V |
| Assist factor | 1.00 |
| Rated current | 11.0-11.0/6.30-6.30 A |
| Starting current | 840-920 % |
| Nominal speed | 2900-2920 rpm |
| Protection class (IEC 34-5) | IP55 |
| Insulation class (IEC 85) | F |
| Integrated motor protection | PTC |
| Cable included | no |
| OTHER | |
|---|---|
| Frequency converter | IT IS NOT |
| Terminal block position | 12 |
| Minimum efficiency index, MEI ≥ | 0.52 |
| Net weight | 33.3kg |
| Gross weight | 35.8kg |
| Danish VVS no | 385214605 |
| Nation of origin | HU |
| Agreement rate no. | 84137075 |
 |
 |