Vernifer wood stain Teak 500 ml cod. 4813

Vernifer wood stain Teak 500 ml cod. 4813

Description:

Water-based impregnating agent suitable for the protection of wood for exteriors and interiors, it gives new vitality allowing natural transpiration.

Its formulation, based on selected resins and specific additives, nourishes, protects and waterproofs the wood from damage caused over time deriving from degradation due to atmospheric agents.

- Quick drying.

- Thanks to the water-based formula, the product is odorless for application even in poorly ventilated environments.

IMPREGNANTE LEGNO is a water-based impregnating agent suitable for the protection of outdoor wood.

Its formulation based on selected resins and specific additives nourishes and protects the wood from damage caused over time deriving from degradation due to atmospheric agents.

USE:

It is particularly suitable for the treatment of wooden artifacts such as: window and door frames, matchboarding, beams, gazebos, fences and wooden sheds, etc.

USE:

ROUGH WOOD:

sand with 120 grit sandpaper to improve and standardize absorption.

TREATED WOOD:

if treated with impregnating agent only, sand and remove any traces of resin, dirt and dust.

If treated with finishing paints, remove the paint before proceeding as with new wood.

Application :

apply 1 or 2 coats of product on raw wood. Wait 4-6 hours between coats. In the warmer seasons, it is recommended to apply IMPREGNANTE LEGNO in the hours

mornings when the temperature is cooler, avoid application in full sun. u

The use of a synthetic bristle brush or pad is recommended for application.

Dilution:

IMPREGNANTE LEGNO is ready to use, if dilution is necessary, use mains water at max 5-10%

WARNINGS:

Mix thoroughly before and occasionally also during application, to maintain correct color uniformity.

• It is always advisable to carry out a preliminary trial to evaluate the aesthetic result

• The use of IMPREGNANTE LEGNO on woods rich in tannins and/or extractives can lead to a change in the white point over time.

• Do not apply with ambient and wooden substrate temperatures below 5°C and above 30°C.

STORAGE:

For storage: keep in a cool and dry place.

In unopened package and stored at room temperature for at least 3 years.