Vernifer dark walnut wood impregnator 500 ml cod. 4810
zoom_out_map
chevron_left chevron_right
-12%

Vernifer dark walnut wood impregnator 500 ml cod. 4810

Vernifer dark walnut wood impregnator 500 ml cod. 4810

€9.47 VAT included €10.76 -12% €7.76 (VAT excl.)

Add the product to your cart and discover an additional discount on top of the one already applied.

VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Vernifer dark walnut wood impregnator 500 ml cod. 4810

Description:

Water-based impregnating agent suitable for the protection of wood for exteriors and interiors, it gives new vitality allowing its natural transpiration.

Its formulation, based on selected resins and specific additives, nourishes, protects and waterproofs the wood from damage caused over time deriving from degradation due to atmospheric agents.

- Quick drying.

- Thanks to the water-based formula, the product is odorless for application even in poorly ventilated environments.

IMPREGNANTE LEGNO is a water-based impregnating agent suitable for the protection of outdoor wood.

Its formulation based on selected resins and specific additives nourishes and protects the wood from damage caused over time deriving from degradation due to atmospheric agents.

USE:

It is particularly suitable for the treatment of wooden items such as: fixtures, doors and windows, matchboarding, beams, gazebos, fences and wooden sheds, etc.

USE:

ROUGH WOOD:

sand with 120 grit sandpaper to improve and standardize absorption.

TREATED WOOD:

if treated with impregnating agent only, sand and remove any traces of resin, dirt and dust.

If treated with finishing paints, remove the paint before proceeding as with new wood.

Application :

apply 1 or 2 coats of product on raw wood. Wait 4-6 hours between coats. In the warmer seasons, it is recommended to apply IMPREGNANTE LEGNO in the hours

mornings when the temperature is cooler, avoid application in full sun. u

The use of a synthetic bristle brush or pad is recommended for application.

Dilution:

IMPREGNANTE LEGNO is ready to use, if dilution is necessary, use mains water at max 5-10%

WARNINGS:

Mix thoroughly before and occasionally also during application, to maintain correct color uniformity.

• It is always advisable to carry out a preliminary trial to evaluate the aesthetic result

• The use of IMPREGNANTE LEGNO on woods rich in tannins and/or extractives can lead to a change in the white point over time.

• Do not apply with ambient and wooden substrate temperatures below 5°C and above 30°C.

STORAGE:

For storage: keep in a cool and dry place.

In unopened package and stored at room temperature for at least 3 years.

Data sheet
Arexons
4810
8002565048109
Shipping

Free Shipping Over:

  • 149€ 🇮🇹

  • 249€ 🇩🇪 🇦🇹

  • 299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿

  • 349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺

  • 399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪

  • 999£ 🇬🇧 🇨🇭 customs duties included

You might also like