copy of Arexons make yourself fiberglass filler 200 gr

Arexons make yourself fiberglass filler 200 gr

PRODUCT DESCRIPTION

Two-component stucco paste based on unsaturated polyester resins with the addition of special glass fibres, which give the mass high mechanical characteristics and surface hardness.

It allows the reconstruction of small missing or severely damaged bodywork parts and the filling of holes thanks to the glass fiber bridges that form over the empty spots.

Tough, medium hard, resists water well and can be sanded after hardening.

The product can be covered with other stuccos or with any other finishing product.

Also usable in the nautical sector.

FIELDS OF USE

It can be applied to steel, cast iron, old paints and fiberglass without release agents.

Aluminum, light alloys, galvanized and difficult-to-adhesion supports must be previously treated with a non-phenolic or acid adhesion primer.

The product is not suitable for wash primers, epox primers with phenolic hardeners, thermoplastic paints, solvent-sensitive primers.

HOW TO USE

The surface to be treated must be dry, clean, free of dust and grease, and roughened by sanding.

Rust must be eliminated as best as possible.

To use, add the hardener to the stucco in relation to the room temperature as per the following table: