Arexons high temperature aluminum acrylic enamel 400 ml cod. 3331

Arexons high temperature aluminum acrylic enamel 400 ml cod. 3331

PRODUCT DESCRIPTION

Special quick-drying silicone resin-based enamel resistant to high temperatures.

It has a high adhesion power on most surfaces.

It is suitable for painting and protecting parts of stoves, heating systems, engine parts, manifolds, stoves, ovens, radiators.

With new solvents with reduced VOC and low danger for humans and the environment.

Contains micronized pigments with high coverage and homogeneous film.

Dispenser button designed to limit dripping and obtain uniformity in the spray pattern.

Self-cleaning valve.

HOW TO USE

Carefully clean the surface to be treated from dust, grease and rust.

Shake the canister vigorously for at least one minute while holding it upside down.

Spray from a distance of 20 ÷ 30 cm.

To avoid dripping, apply two or more light, crossed coats.

For correct drying and temperature resistance, the paint must be passivated for 2 days, on the third day it must be brought gradually with "steps" of 50°C at a time to a temperature of 300°C for a few minutes.

After use, turn the can upside down and spray until only gas comes out to clean the regulator.

Warning: the paint is not suitable for even accidental contact with food or direct flames, therefore avoid using it inside an oven or barbecue.

TEMPERATURE RESISTANCE

The black, aluminium, red and brown colors resist 600°C with peaks up to 800°C.

The white and transparent colors resist up to 300°C.

SHELF LIFE

At least 3 years if stored in the following conditions: in the original and sealed packaging, in a closed environment away from direct sunlight, in a temperature range between 5°C and 35°C