Arexons System 35A73 top sealant 250 ml cod. 4736
Arexons System 35A73 top sealant 250 ml cod. 4736
To seal flat couplings of even complex shapes, with fairly precise surfaces. High resistance and tightness to water, gas, oils, fuels, hydraulic and refrigerant fluids, gases, vapours, chemical agents in general.
Arexons System 35A73 top sealant 250 ml cod. 4736
To seal flat couplings of even complex shapes, with fairly precise surfaces. Recommended on hydraulic and pneumatic control valves, hydraulic power units, flanges in general. Product with low mechanical resistance and high thixotropy, which avoids migration during application. Disassembly of the joint facilitated. It does not present the settling phenomena that occur in traditional gaskets, ensuring correct metal-to-metal contact over time. High resistance and tightness to water, gas, oils, fuels, hydraulic and refrigerant fluids, gases, vapours, chemical agents in general. Tested to ASTM D-1002 and ASTM D-2095 standards. Operating temperature: -55°C to +150°C. Maximum diametric clearance: 0.3 mm. Storage duration at room temperature: 18 months minimum.
DESCRIPTION
Product suitable for flat couplings with fairly precise surfaces, with max. play. 0.30 mm.
Specific for sealing complex piece shapes in cast components.
Allows easy disassembly with normal tools.
Self-shaping product that creates gaskets of any shape.
It replaces traditional gaskets on rigid joints, eliminating the problem of storing different sizes.
It has low mechanical resistance, which facilitates disassembly, and high thixotropy, which avoids product migration during application.
It ensures metal-to-metal contact over time, because it does not present settling phenomena, which instead occur in traditional gaskets.
It has high resistance and resistance to water, oils, fuels, hydraulic and refrigerant fluids, gases and vapors and chemical agents in general.
USE
Recommended for hydraulic and pneumatic control valves, hydraulic power units, flanges in general.
USE
The product is suitable for use on metal surfaces.
Clean and degrease the surfaces with acetone.
Apply the product in sufficient quantities to completely fill the joint.
Assemble normally and wait for curing.
CLASSIFICATION
Product tested according to ASTM Standards: D 1002, D 2095.
WARNINGS
This product is not normally recommended for use with plastic materials, where stress cracking is possible.
Contact our technical service for prior confirmation of compatibility.
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included