Grundfos Pump UPS 20-60 N 150 Cod. 96913106
zoom_out_map
chevron_left chevron_right
-49%

Grundfos Pump UPS 20-60 N 150 Cod. 96913106

Grundfos Circulator UPS 20-60 N 150 Cod.96913106

Useful to:

  • Heating in commercial buildings
  • Domestic hot water recirculation

Grundfos UP, UPS N circulators have a corrosion-resistant stainless steel pump housing and are recommended for domestic hot water recirculation and underfloor heating systems. ON, UPS N can be connected to an on/off time switch to limit pump operation to periods when hot water is normally required.

€392.70 VAT included €770.00 -49% €321.89 (VAT excl.)

Add the product to your cart and discover an additional discount on top of the one already applied.

VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Grundfos UPS circulator 20-60 N 150 Cod.96913106

UPS 20-60 N 150

Product code 96913106

The pump is of the separator tube type with wet rotor, i.e. pump and motor form a single body without mechanical seal and with only two seals.

The bearings are lubricated by the same pumped liquid.

The pump is equipped with a 3-step speed selector

The pump is characterized by:

  • Ceramic radial seal and bearings
  • graphite thrust bearing
  • stainless steel separator sleeve and bearing support
  • wear-resistant impeller (MATIM)
  • Pump body in Stainless steel
  • The motor is of the 1-phase asynchronous type and does not require external protection.

TECHNIQUES
Speed no 3
Nominal flow rate 2.03 m³/h
Prevalence 3,473 m
Max. head 60 dm
TF class 110
Approvals CE, VDE, EAC, WEEE

MATERIALS
Body Pump Stainless steel, EN 1.4301, AISI 304
Impeller Composite, PES+30% GF

INSTALLATION
Ambient temperature limit 0 .. 40°C
Max ambient temperature with liquid at 80°C 40°C
Max operating pressure 10 bars
Connection type G
Attack size 11/4 inch
Nominal pressure of the connection PN 10
Wheelbase 150 mm

LIQUID
Pumped liquid Waterfall
Liquid temperature range 2 ..110 °C
Liquid temperature during operation 60°C
Density 983.2 kg/m³

ELECTRICAL DATA
Flow rate absorbed at speed 1 50W
Flow rate absorbed at speed 2 60W
Max power absorbed 70W
Network frequency 50Hz
Nominal tension 1 x 230V
Current at speed 1 0.22 A
Current at speed 2 0.27 A
Current at speed 3 0.3 A
Capacitor capacity - running 2.5 µF
Protection class (IEC 34-5) IP44
Insulation class (IEC 85) F
Integrated motor protection IT IS NOT
Thermal protection impedance protection

OTHER
Terminal block position 9H
Net weight 2.66kg
Gross weight 2.8kg
Packaging volume 0.004 m³
Nation of origin RS
Agreement rate no. 84137030
Data sheet
GRUNDFOS
96913106
5700313544523
Curves
file_1675154103.3421.png
Drawings
file_1675154106.827.png
Shipping

Free Shipping Over:

  • 149€ 🇮🇹

  • 249€ 🇩🇪 🇦🇹

  • 299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿

  • 349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺

  • 399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪

  • 999£ 🇬🇧 🇨🇭 customs duties included