Pedrollo water inverter STEADYPRES MM 8.5 cod. 50064/605
Variable speed electronic control device for pumps and booster sets.
Water cooled.
Applicable on the pipeline or pump.
It keeps the system pressure constant as the water demand varies.
Protects the pump and the system from operating anomalies.
It can work in parallel with other STEADYPRES up to controlling 3 pumps in cascade.
New software for easier and more intuitive access to settings.
Three levels of adjustment:
- BASIC, to set pressure and current
- ADVANCED, to adapt the inverter to particular system situations
- INSPECTION for detecting the number of stops/starts, the number of operating hours and recording the last operating error
New integrated kit: pressure sensor integrated on the resin board
Check valve and removable flow sensor for a secure seal and a stop flow rate of just 2 l/min
PROTECTIONS:
- Dry running with automatic reset
- Overcurrents
- Overtemperature
- Pump blocked due to non-use
- Output phase control (three-phase model)
POSSIBLE CONFIGURATIONS
Model | STEADYPRES MM 8.5 |
Code | 50064/605 |
Input | single phase |
Outputs | single phase |
Maximum pump power | 1.1 kW - 1.5 HP |
Pressure setting | 1 ÷ 9 |
Input voltage | 1 x 230V |
Output voltage | 1x 230V |
Frequency | 25 ÷ 50/60 Hz |
Maximum current | 8.5A |
Mouths | 1" x 1" |
Maximum working pressure | 10 bars |
Protection | IP65 |
Operating temperature | 0 ÷ 55°C |
Room temperature | 0 ÷ 40°C |
Burst pressure | > 40 bars |
Stopping range | 2 l/min |
Packaging dimensions | 26 x 20 x 26h |
Weight | 3.5kg |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included