DAB Submersible pump NOVA 200 MNA 40th cod.60194402
DAB Submersible pump NOVA 200 MNA 40th cod.60194402
Nova 200 is a submersible pump for draining clear waste water (including rainwater) in domestic and residential areas. They can also be used to empty tanks, vats or cisterns.
Not automatic without float.
DAB Submersible pump NOVA 200 MNA 40th cod.60194402
Not automatic without float.
Submersible pump for draining clear and rainwater in domestic and residential environments.
Its typical application is to empty flooded basements, cellars and garages or to prevent flooding when installed in rainwater collection wells.
It can also be used for emptying tanks or cisterns and as a portable pump in emergency situations where it is required to drain water from flooded rooms.
The Nova series was redesigned to mark forty years of marketing, making it even more reliable, resistant and ergonomic.
It has a new treated cable and a new motor, more compact and efficient.
The pump body, the impeller and the suction grille are made of technopolymer, the motor shaft is made of AISI 431 stainless steel and is suitable for
slightly salty waters.
The impeller is treated to prevent corrosion.
Nova is robust and reliable thanks also to the triple ring seal in oil bath and the continuous service asynchronous type submersible motor.
The stator is housed in an airtight stainless steel case and the rotor is mounted on oversized ball bearings.
Thermal protection is incorporated in all single-phase versions.
High efficiency: Suction of liquid up to a minimum level of 10mm thanks to the possibility of dry operation for up to 1 minute.
In compliance with the European standard EN 60335-2-41, a 10 meter power cable is mandatory for the pump in external use.
GENERAL | |
---|---|
Model | NOVA 200 M NA 40th |
Code | 60194402 |
Version | Not automatic without float |
Liquid temperature range |
From +0°C to +35°C for domestic use; From +0°C to +50°C for other uses. |
Pumped liquid | Clear and rainwater. |
Maximum prevalence | 10.2 m |
Delivery connection | Threaded 1" 1/4 GAS |
Circulator protection degree | IP 68 |
Thermal classification of motor insulation | F |
Power cord type | H05RN-F |
Possible installation types | Fixed or mobile in vertical position |
Delivery direction | horizontal or vertical |
Impeller | Vortex in technopolymer |
Free passage | 5 mm |
Minimum draft depth | 8 mm |
Cable | 10m H05 |
Weight | 4.6kg |
ELECTRICAL DATA | |
---|---|
Phase | Single phase |
Diet | 230V 50Hz |
P1 max kW | 0.35 |
In A | 1.5 |
P2 rated kW | 0.22 |
P2 rated HP | 0.30 |
HYDRAULIC DATA | |||||
---|---|---|---|---|---|
Q=m3h | 0 | 3 | 6 | 9 | 12 |
Q=l/min | 0 | 50 | 100 | 150 | 200 |
H (m) | 7.1 | 5.6 | 4.2 | 2.8 | 1.5 |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included