Grundfos self-priming jet pump JP 4-54 PT 20L Cod. 99463876
Grundfos self-priming jet pump JP 4-54 PT 20L Cod. 99463876
Useful to:
- Domestic groundwater collection
- Increased water pressure for domestic use
- Rainwater collection for domestic buildings
JP PT-H is a booster set consisting of a horizontal diaphragm tank and a self-priming, single-stage centrifugal pump. JP PT-H is designed for gardening and domestic applications.
Grundfos self-priming jet electric pump JP 4-54 PT 20L Cod.99463876
JP 4-54 PT-H AA-BBVP
Product code 99463876
Grundfos JP 4-54 PT-H consists of a Grundfos JP pump, a pressure switch, a pressure gauge and a 20 liter Grundfos GT-H horizontal membrane tank. The booster system features a dual outlet selection for easy installation and a pressure tank to reduce water hammer in the piping.
JP 4-54 PT-H offers the comfort of constant water pressure with automatic start and stop. This is controlled by the combined pressure switch and pressure tank which ensure optimal start/stop of the booster system according to demand. The pressure tank limits the number of start/stop routines, as the water stored in the tank can be used without starting the pump in case of low water consumption or leaks. The cut-in pressure is set to 2.2 bar.
The design is robust and constructed of corrosion-resistant materials to ensure long life. This booster unit guarantees optimal self-priming properties, with a suction height of up to 8 metres. The self-priming pump also ensures stable operation as it is capable of lifting liquid from below the inlet level and can handle a mixture of air and liquid until the pump reaches a fully primed pumping condition.
The JP pump has built-in thermal protection, which immediately stops the pump if it overheats. The motor is air-cooled and equipped with oversized ball bearings, sealed and greased for life to ensure quiet operation and minimal service.
TECHNIQUES | |
---|---|
Nominal flow rate | 4 m³/h |
Prevalence | 22.72 m |
Primary mechanical seal | BBVP |
Approvals | CE, EAC |
Curve tolerance | ISO9906:2012 3B |
Pump version | TO |
Adjustable starting pressure | YES |
Starting pressure | 1.0 - 5.0 bar |
Rated transmission speed | 2840 rpm |
MATERIALS | |
---|---|
Body Pump | Steel EN 1.4301 AISI 304 |
Impeller | Composite, PPO-20GF |
Material code | TO |
INSTALLATION | |
---|---|
Minimum ambient temperature | 0°C |
Max ambient temperature | 40°C |
Max operating pressure | PN 6 bar |
Pump suction | G 1 (F) |
Pump delivery | G 1 (F) |
Nominal pressure of the connection | PN 6 |
LIQUID | |
---|---|
Pumped liquid | Waterfall |
Liquid temperature range | 0 .. 40 °C |
Liquid temperature during operation | 20°C |
Density | 998.2 kg/m³ |
ELECTRICAL DATA | |
---|---|
Power absorbed - P1 | 1020W |
Rated power - P2 | 0.75 kW |
Network frequency | 50Hz |
Rated voltage [V] | 1 x 220-240V |
Rated current | 4.5 A |
Starting current | 16.9A |
Rated transmission speed | 2840 rpm |
Capacitor capacity - running | 16 µF/450V |
Protection class (IEC 34-5) | IP44 |
Insulation class (IEC 85) | F |
Cable length | 1.5 m |
Power plug | SCHUKO |
OTHER | |
---|---|
Tank volume | 20 l |
Net weight | 21kg |
Gross weight | 22kg |
Nation of origin | HU |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included