Grundfos Circulator UPS 25-60 N 180 Code 96913085
zoom_out_map
chevron_left chevron_right
-49%

Grundfos Circulator UPS 25-60 N 180 Code 96913085

Grundfos Circulator UPS 25-60 N 180 Cod.96913085

Useful to:

  • Heating in commercial buildings
  • Domestic hot water recirculation

Grundfos UP, UPS N circulators have a corrosion-resistant stainless steel pump housing and are recommended for domestic hot water recirculation and underfloor heating systems. ON, UPS N can be connected to an on/off time switch to limit pump operation to periods when hot water is normally required.

€463.08 VAT included €908.00 -49% €379.57 (VAT excl.)

Extra discount on your cart! Add the product to your cart and discover an additional discount on top of the one already applied.

VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Grundfos Circulator UPS 25-60 N 180 Cod.96913085

UPS 25-60N 180

Product code 96913085

The pump is of the separator tube type with wet rotor, i.e. pump and motor form a single body without mechanical seal and with only two gaskets.

The bearings are lubricated by the pumped liquid itself.

The pump is equipped with a 3-step speed selector

The pump is characterized by:

  • Ceramic seal and radial bearings
  • graphite thrust bearing
  • separator tube and bearing support in stainless steel
  • wear resistant impeller (MATIM)
  • pump body in stainless steel
  • The motor is of the 1-phase asynchronous type and does not require external protection.
Data sheet
GRUNDFOS
96913085
5700313543465
Specifications
TECHNIQUES
Speed no 3
Nominal flow rate 1.91 m³/h
Prevalence 3.1m
Max head 60 dm
TF class 110
Approvals CE, VDE, EAC, WEEE, RCM

MATERIALS
Body Pump Stainless steel, EN 1.4308
Impeller Composite, PES+30% GF

INSTALLATION
Ambient temperature limit 0 .. 40°C
Max ambient temperature with liquid at 80°C 40°C
Max operating pressure 10 bars
Connection type g
Attack size 11/2inch
Nominal pressure of the connection NP 10
Wheelbase 180mm

LIQUID
Pumped liquid Waterfall
Liquid temperature range 2 ..110 °C
Liquid temperature during operation 60°C
Density 983.2 kg/m³

ELECTRICAL DATA
Flow absorbed at speed 1 50W
Flow absorbed at speed 2 55W
Max absorbed power 60W
Network frequency 50Hz
Nominal tension 1 x 230V
Current at speed 1 0.21A
Current at speed 2 0.25A
Current at speed 3 0.28A
Capacitor capacity - run 2.5 µF
Protection class (IEC 34-5) IP44
Insulation class (IEC 85) f
Integrated motor protection IT IS NOT
Thermal protection impedance protection

OTHER
Terminal block location 9H
Net weight 2.86kg
Gross weight 2.97kg
Packing volume 0.004 m³
No Danish VVS 380481061
No Swedish RSK 5803097
Finnish 4615616
N.NRF Norwegian 9042215
Country of origin RS
Convention rate n. 84137030
Curves
file_1675154987.7317.png
Drawings
file_1675154991.9399.png
Shipping

Free Shipping Over:

  • 149€ 🇮🇹

  • 249€ 🇩🇪 🇦🇹

  • 299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿

  • 349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺

  • 399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪

  • 999£ 🇬🇧 🇨🇭 customs duties included