Grundfos circulator pump UPS 25-40 N 180 Cod. 96913060
zoom_out_map
chevron_left chevron_right
-49%

Grundfos circulator pump UPS 25-40 N 180 Cod. 96913060

Grundfos Circulator UPS 25-40 N 180 Cod.96913060

Useful to:_

  • Heating in commercial buildings
  • Domestic hot water recirculation

Grundfos UP, UPS N circulators have a corrosion resistant stainless steel pump housing and are recommended for domestic hot water recirculation and underfloor heating systems. ON, UPS N can be connected to an on/off time switch to limit pump operation to periods when hot water is normally required.

€297.84 VAT included €584.00 -49% €244.13 (VAT excl.)

Add the product to your cart and discover an additional discount on top of the one already applied.

VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Grundfos UPS circulator 25-40 N 180 Cod.96913060

UPS 25-40 N 180

Product code 96913060

The pump is of the separating tube type with wet rotor, i.e. pump and motor form a single body without mechanical seal and with only two seals.

The bearings are lubricated by the same pumped liquid.

The pump is equipped with a 3-step speed selector

The pump is characterized by:

  • Ceramic radial seal and bearings
  • graphite thrust bearing
  • stainless steel separator sleeve and bearing support
  • wear-resistant impeller (MATIM)
  • Pump body in Stainless steel
  • The motor is of the 1-phase asynchronous type and does not require external protection.

TECHNIQUES
Speed no 3
Nominal flow rate 1.67 m³/h
Prevalence 2.03 m
Max. head 40 dm
TF class 110
Approvals CE, VDE, EAC, WEEE

MATERIALS
Body Pump Stainless steel, EN 1.4301, AISI 304
Impeller Composite, PES+30% GF

INSTALLATION
Ambient temperature limit 0 .. 40°C
Max ambient temperature with liquid at 80°C 40°C
Max operating pressure 10 bars
Connection type G
Attack size 11/2 inch
Nominal pressure of the connection PN 10
Wheelbase 150 mm

LIQUID
Pumped liquid Waterfall
Liquid temperature range 2 ..110 °C
Liquid temperature during operation 60°C
Density 983.2 kg/m³

ELECTRICAL DATA
Flow rate absorbed at speed 1 25W
Flow rate absorbed at speed 2 35W
Max power absorbed 45W
Network frequency 50Hz
Nominal tension 1 x 230V
Current at speed 1 0.12A
Current at speed 2 0.16 A
Current at speed 3 0.2A
Capacitor capacity - running 1.5 µF
Protection class (IEC 34-5) IP44
Insulation class (IEC 85) F
Integrated motor protection IT IS NOT
Thermal protection impedance protection

OTHER
Terminal block position 9H
Net weight 2.67kg
Gross weight 2.8kg
Danish VVS no 380481041
Swedish RSK No 5803098
Packaging volume 0.004 m³
Nation of origin RS
Agreement rate no. 84137030
Data sheet
GRUNDFOS
96913060
5700313543083
Curves
file_1675154595.9639.png
Drawings
file_1675154599.312.png
Shipping

Free Shipping Over:

  • 149€ 🇮🇹

  • 249€ 🇩🇪 🇦🇹

  • 299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿

  • 349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺

  • 399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪

  • 999£ 🇬🇧 🇨🇭 customs duties included