Grundfos Jet Self Priming Pumps JP 4-47 PM1-1.5 Cod. 99515136
zoom_out_map
chevron_left chevron_right
-47%

Grundfos Jet Self Priming Pumps JP 4-47 PM1-1.5 Cod. 99515136

Grundfos self-priming jet pump JP 4-47 PM1-1.5 Cod. 99515136

Useful to:

  • Domestic groundwater collection
  • Increased water pressure for domestic use
  • Rainwater collection for domestic buildings

JP PM is a booster set consisting of a pressure manager and a self-priming, single-stage centrifugal pump. JP PM has been designed for various domestic and garden applications and is equipped with dry-running protection.

€332.84 VAT included €628.00 -47% €272.82 (VAT excl.)

Extra discount on your cart! Add the product to your cart and discover an additional discount on top of the one already applied.

VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Grundfos self-priming jet pump JP 4-47 PM1-1.5 Cod. 99515136

JP 4-47 PM1 AA-BBVP

Product code 99515136

The Grundfos JP 4-47 PM1 booster consists of a Grundfos JP pump and a pressure manager. JP 4-47 PM1 offers the comfort of constant water pressure with automatic start and stop matched to consumption by the intelligent pressure manager. The pressure switch starts the pump at 1.5 bar and the pump continues to run as long as there is flow.

The design is robust and built on corrosion resistant materials to ensure a long life. This booster system guarantees optimal self-priming properties, with a suction height of up to 8 meters. The self-priming pump also ensures stable operation as it is capable of lifting liquid from below the inlet level and can handle a mixture of air and liquid until the pump reaches a fully primed pumping condition.

JP 4-47 PM1 incorporates a dry-running protection that automatically stops the pump in case of dry-running. This means less risk of pump damage and lower maintenance costs. The anti-cycle function stops the pump in time in the event of a small leak in the system or if a tap has not been closed completely. When a cycle occurs, the pump stops and an alarm is indicated. A non-return valve for backflow prevention is already integrated.

The JP pump has built-in thermal protection, which immediately stops the pump in the event of overheating. The motor is air-cooled and equipped with oversized ball bearings, sealed and greased for life to ensure quiet operation and minimal service.

Data sheet
GRUNDFOS
99515136
New product
5713830350225
Specifications
TECHNIQUES
Nominal flow rate 4 m³/h
Prevalence 16.75 m
Primary mechanical seal BBVP
Approvals CE,EAC
Curve tolerance ISO9906:2012 3B
Pump version TO
Adjustable starting pressure no
Starting pressure 1.5 bar
Rated transmission speed 2800 rpm

MATERIALS
Body Pump Stainless steel EN 1.4301 AISI 304
Impeller Composite, PPO-20GF

INSTALLATION
Minimum ambient temperature 0°C
Max. Ambient 40°C
Max operating pressure PN 6 bar
Pump suction G 1 (F)
Pump delivery G 1 (F)
Nominal pressure of the connection PN 6

LIQUID
Pumped liquid Waterfall
Liquid temperature range 0 .. 40 °C
Liquid temperature during operation 20°C
Density 998.2 kg/m³

ELECTRICAL DATA
Power absorbed P1 840W
Rated power P2 0.55 kW
Network frequency 50Hz
Rated voltage [V] 1 x 220-240V
Rated current 3.9A
Starting current 13.2 A
Rated transmission speed 2800 rpm
Capacitor capacity - running 12 µF/450V
Protection class (IEC 34-5) IP44
Insulation class (IEC 85) F
Cable length 1.5 m
Cable plug type SCHUKO
Connector type Type E/F (CEE7/7)

OTHER
Net weight 10kg
Gross weight 14kg
Finnish 4732543
N. Norwegian NRF 9040045
Nation of origin HU
Agreement rate no. 84137051
Environmental approvals WEEE
curves
file_1661766949.8299.png
DRAWINGS
file_1661766971.5445.png
Free shipping

Free Shipping Over:

  • 149€ 🇮🇹

  • 249€ 🇩🇪 🇦🇹

  • 299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿

  • 349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺

  • 399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪

  • 999£ 🇬🇧 🇨🇭 customs duties included