Grundfos self-priming electric pump JP 3-42 PM1-1.5 Cod. 99515135
Grundfos self-priming electric pump JP 3-42 PM1-1.5 Cod. 99515135
Useful to:
- Domestic groundwater collection
- Increased water pressure for domestic use
- Rainwater collection for domestic buildings
JP PM is a booster set consisting of a pressure manager and a self-priming, single-stage centrifugal pump. JP PM has been designed for various domestic and garden applications and is equipped with dry-running protection.
Grundfos self-priming electric pump JP 3-42 PM1-1.5 Cod. 99515135
JP 3-42 PM1 AA-BBVP
product code 99515135
The Grundfos JP 3-42 PM1 booster consists of a Grundfos JP pump and a pressure manager. JP 3-42 PM1 offers the comfort of constant water pressure with automatic start and stop matched to consumption by the intelligent pressure manager. The pressure switch starts the pump at 1.5 bar and the pump continues to run as long as there is flow.
The design is robust and built on corrosion resistant materials to ensure a long life. This booster system guarantees optimal self-priming properties, with a suction height of up to 8 meters. The self-priming pump also ensures stable operation as it is capable of lifting liquid from below the inlet level and can handle a mixture of air and liquid until the pump reaches a fully primed pumping condition.
JP 3-42 PM1 incorporates dry-running protection which automatically stops the pump in case of dry-running. This means less risk of pump damage and lower maintenance costs. The anti-cycle function stops the pump in time in the event of a small leak in the system or if a tap has not been closed completely. When a cycle occurs, the pump stops and an alarm is indicated. A non-return valve for backflow prevention is already integrated
The JP pump has built-in thermal protection, which immediately stops the pump in the event of overheating. The motor is air-cooled and equipped with oversized ball bearings, sealed and greased for life to ensure quiet operation and minimal service.
TECHNIQUES | |
---|---|
Nominal flow rate | 3 m³/h |
Prevalence | 17.91 m |
Primary mechanical seal | BBVP |
Approvals | CE,EAC |
Curve tolerance | ISO9906:2012 3B |
Pump version | TO |
Adjustable starting pressure | NO |
Starting pressure | 1.5 bar |
Rated transmission speed | 2850 rpm |
MATERIALS | |
---|---|
Body Pump | Stainless steel EN 1.4301 AISI 304 |
Impeller | Composite, PPO-20GF |
Material code | TO |
INSTALLATION | |
---|---|
Minimum ambient temperature | 0°C |
Max. Ambient | 40°C |
Max operating pressure | PN 6 bar |
Standard hose connection | ISO 228-1 |
Pump suction | G 1 (F) |
Pump delivery | G 1 (F) |
Nominal pressure of the connection | PN 6 |
LIQUID | |
---|---|
Pumped liquid | Waterfall |
Liquid temperature range | 0 .. 40 °C |
Liquid temperature during operation | 20°C |
Density | 998.2 kg/m³ |
ELECTRICAL DATA | |
---|---|
Power absorbed - P1 | 700W |
Rated power - P2 | 0.55 kW |
Network frequency | 50Hz |
Rated voltage [V] | 1 x 220-240V |
Rated current | 3.2 A |
Starting current | 13.2 A |
Rated transmission speed | 2850 rpm |
Capacitor capacity - running | 12 µF/450V |
Protection class (IEC 34-5) | IP44 |
Insulation class (IEC 85) | F |
Cable length | 1.5 m |
Cable plug type | SCHUKO |
Connector type | Type E/F (CEE7/7) |
OTHER | |
---|---|
Net weight | 9kg |
Gross weight | 14kg |
Nation of origin | HU |
Agreement rate no. | 84137051 |
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included