Calpeda pump with peripheral impeller Series CT 61

Calpeda pump with peripheral impeller Series CT 61

Execution

Monobloc electric pumps with peripheral impeller.

Compact, patented construction with motor housing and wall

pump side in one piece.

Protected against water entering the engine from the outside.

CT: version with cast iron pump body.

B-CT: version with bronze pump body.

The bronze pumps are supplied fully painted.

Employments

For clean liquids without abrasive parts, without suspended parts,

non-explosive, non-aggressive to the pump materials.

To increase the pressure available from a distribution network

(observe local regulations).

Due to their small size, these electric pumps are ideally suited

for installation in cooling machines and equipment,

conditioning and circulation.

Limits of use

Liquid temperature up to 60 ° C.

Ambient temperature up to 40 ° C.

Manometric suction height up to 7 m.

Maximum final pressure allowed in the pump body: 6 bar.

Continuous service (S3 60% for three-phase).

Motor

2-pole induction motor, 50 Hz (n = 2900 1 / min).

CT 61: three-phase 230/400 V ± 10%.

CTM 61: single-phase 230 V ± 10%, with thermal protector.

Capacitor inserted in the terminal box.

Class F insulation.

IP 54 protection.

Three-phase motors with IE2 efficiency class.

Execution according to: EN 60034-1;

EN 60335-1, EN 60335-2-41.