Arexons black silicone gasket 200 ml cod. 0099
Arexons black silicone gasket 200 ml cod. 0099
Gasket for sealing the engine oil sump, dynamic joints, water pumps, differentials, gearboxes and wherever a pre-formed gasket needs to be replaced. Replaces all cork, felt, paper, silicone, rubber, etc. gaskets of any size. It resists temperatures from -50°C to +180°C with peaks of 250°C for limited periods, water, mineral and synthetic oils, LPG, diesel, radiator fluids. Does not adhere to PE, PP, PTFE, bituminous surfaces.
Arexons black silicone gasket 200 ml cod. 0099
DESCRIPTION
Single-component silicone based on acetic cross-linking polysiloxane in a practical, easy-to-use self-extruding package.
The technical properties are superior to normal silicones, allowing the product to be used in the automotive sector where resistance to particularly harsh conditions, pressure and resistance to solvents, lubricating fluids and mechanical stress are required.
Silicone has excellent dielectric properties and excellent adhesion to most materials.
USE
The product is able to replace all gaskets made of cork, felt, paper, silicone, rubber, etc., of any shape and size.
It resists temperatures from –50°C to +180°C continuously (peaks up to 250°C).
It is suitable for bonding already polymerized silicone and wherever seals resistant to water, mineral and synthetic oils, LPG, diesel, radiator fluids and in general to various types of solvents are required.
Does not adhere to PE, PP, PTFE and bituminous surfaces.
USE
- Cut the tip to the desired size.
- Remove the seal located at the bottom of the dispenser
- Rotate the tip to the left by ¼ turn
Remove the gasket to be replaced. Surfaces must be clean and dry.
Dispense the product, pressing the lever lightly, evenly onto one of the two surfaces, taking care to fill well also around the bolt holes.
Wait approximately 10 minutes, until the skin forms, before assembling the parts.
After use, let a small amount of product come out of the nozzle, it will serve as a cap to preserve Black silicone gasket for longer.
Replace the supplied red cap.
Before using it again, remove the cap of hardened material and act as previously described.
Free Shipping Over:
-
149€ 🇮🇹
-
249€ 🇩🇪 🇦🇹
-
299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿
-
349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺
-
399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪
-
999£ 🇬🇧 🇨🇭 customs duties included