Grundfos mixing group MIXIT 25-6.3 L cod. 99508816
zoom_out_map
chevron_left chevron_right
-49%

Grundfos mixing group MIXIT 25-6.3 L cod. 99508816

Grundfos mixing unit MIXIT 25-6.3 NRV left bypass cod. 99508816

Useful to:

  • Air conditioning - Commercial buildings
  • Heating in commercial buildings

The Grundfos MIXIT valve unit is designed for heating and cooling systems. MIXIT offers temperature control, application-specific settings, ecological functions, such as balance limiters and pressure independence, as well as access to the Grundfos BuildingConnect Free Monitoring solution.

€1,668.34 €3,271.25 -49% €1,367.49 (VAT excl.)
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Grundfos mixing group MIXIT 25-6.3 NRV left bypass cod. 99508816

Model: MIXIT 25-6.3 L NRV

Grundfos MIXIT is a complete prefabricated mixing circuit with integrated control functions designed for heating and cooling systems.

MIXIT is mainly suitable for three-way installations in large buildings, such as schools, without the need for monitoring, pressure independence or balancing.

With MIXIT a complete mixing circuit is built with only two components: a MIXIT valve unit and the best-in-class Grundfos MAGNA3 circulation pump.

Because MIXIT communicates wirelessly with MAGNA3, only two power cables are required for the MIXIT system to operate.

The compact design ensures maximum space utilization and a neat, compact installation.

MIXIT has an integrated actuator and controller and integrated flow and temperature sensors.

Thanks to the uniquely designed valve and real-time sensor measurements, MIXIT ensures precise flow temperature control even at low flow rates.

The threaded versions of MIXIT have an integrated removable check valve.

Non-return valves are available as accessories for flange versions.

MIXIT is controlled via an intuitive operation panel and communicates wirelessly with Grundfos GO Remote for easy setup and control.

MIXIT can be configured via three I/O terminals and two relay outputs.

The MIXIT system can operate as a stand-alone mixing circuit in buildings without additional equipment. Fieldbus (BACnet, Modbus or GENIbus) via Ethernet RJ45 and RS485 transceiver ensures easy BMS integration, allowing MIXIT to also function as a subsystem in larger buildings.

MIXIT offers all the functions you need to adapt the mixing loop to your system, including the following:

  • Temperature control
  • Reduction of the external set point for radiator heating systems
  • Underfloor overheating protection for underfloor heating systems
  • Coil preheating and frost protection for air handling unit systems
  • Pump control mode for all heating and cooling applications
  • External temperature compensation
  • Eco program and switch-off during the hot season.

MIXIT DYNAMIC also gives access to Grundfos BuildingConnect Free Monitoring, a real-time monitoring system with alarm and warning notifications.

MIXIT can be combined with DYNAMIC and CONNECT upgrade.

TECHNIQUES
Min. flow rate 0.3 m³/h
Max. flow rate 3.5 m³/h
TF class 110
Approvals THERE IS
Model TO
Non-return valve Yes
Independent pressure control No

MATERIALS
Collector Cast iron, EN-GJS-500-7

INSTALLATION
Ambient temperature limit 0 .. 50°C
Max operating pressure 10 bars
Connection type G
Attack size 11/2 inch
Nominal pressure of the connection PN 10
Shunt orientation left

LIQUID
Liquid temperature range 0 .. 90°C

ELECTRICAL DATA
Input power - P1 8 kW
Network frequency 50Hz
Nominal tension 1 x 230V
Maximum current consumption 0.1A
Protection class (IEC 34-5) X4D

OTHER
Net weight 5.56kg
Gross weight 6.77kg
Packaging volume 0.0032 m³
Nation of origin DE
Agreement rate no. 84818051
Data sheet
GRUNDFOS
99508816
New product
5713830256350
Drawings
file_1678351909.3708.png
Redefinition of the mixing circuit

Costo Spedizione Metodi Pagamento