Grundfos horizontal multistage centrifugal pump CME-I 1-2 cod. 98394750
zoom_out_map
chevron_left chevron_right
-49%

Grundfos horizontal multistage centrifugal pump CME-I 1-2 cod. 98394750

Grundfos horizontal multistage centrifugal pump CME-I 1-2 cod. 98394750

  • Air conditioning - Commercial buildings
  • Pressure Boost - Commercial Buildings
  • Increased water pressure for domestic use
  • District heating
  • Irrigation
  • Desalination
  • Industrial heating
  • Washing and cleaning
  • Industrial water supply
  • Community water supply
  • Water distribution

The CME model is a reliable, quiet and compact horizontal suction pump with integrated frequency converter and intelligent functions. The modular design of the pump facilitates the creation of customized solutions.

€1,062.33 VAT included €2,083.00 -49% €870.76 (VAT excl.)

Add the product to your cart and discover an additional discount on top of the one already applied.

VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Grundfos horizontal multistage centrifugal pump CME-I 1-2 cod. 98394750

Model: CME 1-2 ARIE-AQQE UADN

Compact, reliable, horizontal, multi-stage centrifugal pump, with radial suction port and discharge port.

The materials of the pump in contact with the liquid are stainless steel.

The mechanical seal is a special type, unbalanced O-ring.

The piping connection is via Whitworth, Rp (ISO 7/1) internal threads.

The pump is equipped with a 1-phase, permanent magnet, air-cooled synchronous motor.

The motor efficiency is classified as IE5 according to IEC 60034-30-2.

The motor has an integrated frequency converter with PI regulator.

This allows fine regulation of the motor speed which, in this way, provides performance suited to the system's requirements.

A control panel on the motor terminal block allows setting the required setpoint, as well as setting the pump to "Min" operation. or "Max." or "Stop".

The Grundfos Eye indicator on the control panel provides a visual indication of the pump status:

  • "Ignition": The engine is running (spinning green lights) or not running (solid green lights)
  • "Warning": The engine is still running (spinning yellow lights) or has stopped (steady yellow lights)
  • "Alarm": The engine has stopped (flashing red lights).

Communication with the pump is possible via Grundfos GO Remote (accessory).

The remote control allows you to make further settings and read various parameters, such as "Actual value", "Speed", "Power consumption" and total "Energy consumption".

The terminal block contains the terminals for the following connections:

  • a dedicated digital input
  • two analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5-3.5 V
  • 5 V supply voltage for potentiometer and sensor
  • a configurable digital input or open collector output
  • Grundfos digital sensor input and output
  • 24 V supply voltage for the sensors
  • two relay signal outputs (potential-free contacts)
  • GENIbus connection
  • interface for the Grundfos CIM fieldbus module.

TECHNIQUES
Pump speed on which the pump data is based 3480 rpm
Nominal flow rate 2.04 m³/h
Prevalence 18.01 m
Impellers 2
Code for shaft seal AQQE
Approvals CE, EAC, CURUS, UKCA
Drinking water approvals WRAS, ACS, NSF61, UBA
Curve tolerance ISO9906:2012 3B
Pump version TO
Model TO

MATERIALS
Body Pump Stainless steel, EN 1.4301, AISI 304
Impeller Stainless steel, EN 1.4301, AISI 304
Material code THE
Code for rubber AND

INSTALLATION
Ambient temperature limit -20 .. 55°C
Max operating pressure 16 bars
Max pressure at the mentioned temperature 16 bar / 90°C - 10 bar / 120°C
Connection type Rep
Size of the inlet connection 1 inch
Size of the output connection 1 inch
Exit position 12
Pump connection code R

LIQUID
Pumped liquid Waterfall
Liquid temperature range -20 .. 120°C
Liquid temperature during operation 20°C
Density 998.2 kg/m³

ELECTRICAL DATA
Standard engine IEC
Structure dimensions 71A
Rated power - P2 0.55 kW
Network frequency 50/60 Hz
Usable for 50/60 Hz Yes
Nominal tension 1 x 200-240V
Rated current 3.45-2.90 A
Nominal speed 360-4000 rpm
Protection class (IEC 34-5) IP55
Insulation class (IEC 85) F

OTHER
Frequency converter Built-in
Terminal block position 12
Minimum efficiency index, MEI ≥ 0.68
Net weight 14.3kg
Gross weight 17.8kg
Danish VVS no 385230020
Nation of origin HU
Agreement rate no. 8413075
Data sheet
GRUNDFOS
98394750
5711494277490
Curves
file_1677753985.3789.png
Drawings
file_1677753989.8836.png
Shipping

Free Shipping Over:

  • 149€ 🇮🇹

  • 249€ 🇩🇪 🇦🇹

  • 299€ 🇧🇪 🇫🇷 🇱🇺 🇳🇱 🇵🇱 🇨🇿

  • 349€ 🇩🇰 🇵🇹 🇸🇰 🇪🇸 🇭🇺

  • 399€ 🇧🇬 🇭🇷 🇪🇪 🇮🇪 🇱🇻 🇱🇹 🇷🇴 🇸🇮 🇸🇪

  • 999£ 🇬🇧 🇨🇭 customs duties included