Pattex Bathroom and Kitchen Sealant
Pattex Bathroom and Kitchen Sealant Blister 50 ml
White acetic silicone sealant ideal for sealing bathroom and kitchen furniture such as shower cubicles, sinks, bathtubs. Resists mold, UV rays, water and common detergents.
Are You a Company?
To enable the compilation of all data, check the "Company" option in the "Addresses" tab.
Fast and traceable shipping throughout Europe.
Click here to see how to take advantage of free shipping in your country.
New Products with Warranty
All products on our site are new and covered by warranty.
Pattex Bathroom and Kitchen Sealant
Acetic-curing silicone sealant.
FIELDS OF USE
Ideal for sealing bathrooms, kitchens, shower cubicles, sinks, toilets, laundry tubs and sanitary ware in general.
Resistant to mold, UV rays, atmospheric agents and common detergents.
TECHNICAL FEATURES
Chemical nature: Silicone elastomer with mold resistant agents
Appearance: Thixotropic paste
Density: Approx. 0.98 g/ml
Skin time: Approx. 15 minutes (depending on temperature and humidity)
Bulk hardening time (at 23°C RH 50%): Approx. 2 mm/24 hours
Application temperature: From +5°C to +40°C
Operating temperature From -30°C to +120°C
STORAGE
Pattex Bagni must be stored in a cool, dry place at a temperature not lower than +5°C. If well stored, the product is stable for 24 months.
HOW TO USE
Preparation of the supports
Surfaces must be clean, dry and free from oils, greases, dust and oxides.
Application
Extrude the product by cutting the nozzle according to the diameter of the bead you want to obtain.
In the case of expansion joints, before sealing, press in a non-stick foam bead to delimit the depth of the sealant and prevent it from adhering to the bottom. Smooth the bead with a spatula soaked in soapy water before the surface skin forms.
WARNINGS
Do not expose to direct water until a consistent surface skin has formed.
The product which has not yet hardened can be removed with alcohol. The polymerised product can only be removed mechanically.
