Grundfos booster pump for domestic use UPA 15-160 Cod. 99331335
Grundfos booster pump for domestic use UPA 15-160 Cod. 99331335
Useful to:
- Domestic hot water recirculation
UPA is a compact, high efficiency in-line booster pump designed for residential homes. UPA increases water pressure to required levels in showers, faucets and other outlets.
Visa - Mastercard - American Express - Paypal - Paypal in 3 rate - Bonifico Bancario.
Fast and trackable shipping. Your satisfaction, our commitment!
All products on our site are new and covered by warranty.
Please register as a Professional Account to enable all data.
Grundfos pressure booster pump for domestic use UPA 15-160 Cod.99331335
Grundfos UPA 15-160 pump
Product code: 99331335
Grundfos UPA 15-160 is a domestic booster designed to increase the pressure of drinking water supplied from an external source in residential homes.
UPA booster pumps increase the pressure of domestic water to make the required pressure available at showers, taps and other withdrawal points.
This pump has a 1 inch inlet and outlet port.
The pressure rating of the pump corresponds to PN 10 and a port-to-port length of 203 mm.
The UPA 15-160 offers the comfort of constant water pressure with automatic start and stop.
This is controlled by the external flow switch which ensures optimal start/stop of the booster pump based on demand.
The flow switch is supplied with the pump.
The design is robust and made with anti-corrosion materials and cast iron pump body with cataphoresis coating to ensure long life.
The pump is of the box rotor type where the pump and motor form an integral unit without a shaft seal.
This pump must always be installed with a horizontal drive shaft.
This high-efficiency booster has a 4-pole, synchronous, permanent magnet motor with frequency converter.
The bearings are lubricated by the pumped liquid.
These construction features guarantee maintenance-free operation.
The pump has the following approvals CE, WEEE-UPA.
External flow switch: ensures automatic start/stop based on demand
Low noise level
Easy installation: Compact plug and pump inline booster
Highly efficient PM technology with ECM
Integrated non-return valve
Better corrosion resistance
Integrated engine protection
| TECHNIQUES | |
|---|---|
| Speed no | 1 |
| Nominal flow rate | 2.95 m³/h |
| Prevalence | 9,615 m |
| Max. head | 160 dm |
| TF class | 95 |
| Approvals | CE, WEEE-UPA |
| MATERIALS | |
|---|---|
| Body Pump | Cast iron, EN 1561 EN-GJL-150 |
| Impeller | Composite, PP-GF30 |
| INSTALLATION | |
|---|---|
| Ambient temperature limit | 0 .. 40 °C |
| Max operating pressure | 10 bars |
| Connection type | G |
| Size attack | 1 inch |
| Nominal pressure of the connection | PN 10 |
| Wheelbase | 203 m |
| LIQUID | |
|---|---|
| Pumped liquid | Waterfall |
| Liquid temperature range | 2 .. 95 °C |
| Liquid temperature during operation | 60°C |
| Density | 983.2 kg/m³ |
| ELECTRICAL DATA | |
|---|---|
| Max power absorbed | 180W |
| Network frequency | 50Hz |
| Nominal tension | 1 x 230V |
| Maximum current consumption | 1.41A |
| Capacitor capacity - running | 0.2 µF |
| Protection class (IEC 34-5) | X2D |
| Insulation class (IEC 85) | F |
| Integrated motor protection | ELECT. |
| Thermal protection | internal |
| Power plug | No plugs |
| OTHER | |
|---|---|
| Flow switch Yes / No | YES |
| Net weight | 3.14kg |
| Gross weight | 3.26kg |
| Packaging volume | 0.008 m³ |
For additional information and technical data sheets, click the link and enter the identified product code in the search bar.
feedback Report comment