Grundfos condensate lifting pump CONLIFT1 LS cod. 98455601
zoom_out_map
chevron_left chevron_right
-42%

Grundfos condensate lifting pump CONLIFT1 LS cod. 98455601

Grundfos condensate lifting pump CONLIFT1 LS cod. 98455601

The CONLIFT1 models are condensate removal pumps suitable for pumping condensate that has accumulated below the level of the drainage system, which is unable to flow to the building drainage system or which is unable to discharge by natural descent .

€82.94

€67.98 VAT excluded

€143.00 -42%

pagamenti

check Available
100% Secure Payments
Visa - Mastercard - American Express - Paypal - Paypal in 3 rate - Bonifico Bancario.
Shipping throughout Europe
Fast and trackable shipping. Your satisfaction, our commitment!
New products with warranty
All products on our site are new and covered by warranty.
Are you a company?
Please register as a Professional Account to enable all data.
Description

Grundfos condensate lifting pump CONLIFT1 LS cod. 98455601

Conlift1 LS is suitable for pumping condensate collected below the sewer level or which cannot flow to the sewer system or building drain via a natural downward slope.

Typical applications:

  • Condensing boilers.
  • For condensate with a pH value above 2.5. • For condensation in air conditioning systems, cooling and refrigeration systems, air dehumidifiers and evaporators.
  • For condensate with a pH value less than 2.5, use Conlift2 pH +. Characteristics
  • Completely sealed against moisture and evaporation.
  • Quick and easy installation.
  • Very quiet and smooth operation.
  • It can be mounted on the floor or on a wall. • Pre-assembled non-return valve.
  • Pump operation test button.
  • Built-in high water float switch. • Fully automatic operation.
  • Inlet and exhaust hose connectors included.

PRV connection: the exhaust safety valves (PRV) of condensing boilers (<40kW) can be connected to the unit when the exhaust temperature does not exceed 90°C for a period of max. 5 minutes.

The exhaust connection from the PRV must comply with the boiler manufacturer's instructions.

TECHNIQUES
Maximum capacity 0.167 l/s
Max. head 5.5 m
Approvals on the nameplate VDE, GOST

INSTALLATION
Pump suction 18-30
Pump delivery 8-10

LIQUID
Liquid temperature range 50°C
Density 998.2 kg/m³
Min. pH-value 2.7

ELECTRICAL DATA
P1 power input 75W
Network frequency 50Hz
Nominal tension 1 x 230V
Rated current 0.65 A
Protection class (IEC 34-5) IP20
Insulation class (IEC 85) F
Cable length 1.7m
Cable plug type SCHUKO
Network cable H05W-F36

OTHER
Total volume of tank(s) 2.65 l
Net weight 4.1kg
Data sheet
98455601
5711495351540
SEARCH ADDITIONAL INFORMATION

For additional information and technical data sheets, click the link and enter the identified product code in the search bar.

SEARCH TECHNICAL DATA SHEETS AND INFORMATION

chat Comments (0)