Grundfos UPA 15-90 AUTO pump Cod. 99538895
zoom_out_map
chevron_left chevron_right
-28%

Grundfos UPA 15-90 AUTO pump Cod. 99538895

Grundfos booster pump for domestic use UPA 15-90 Cod.99538895

Useful to:

  • Domestic hot water recirculation

UPA is a compact, high efficiency in-line booster pump designed for residential homes. UPA increases water pressure to required levels in showers, faucets and other outlets.

€185.47

€152.03 VAT excluded

€257.60 -28%

pagamenti

check Available
100% Secure Payments
Visa - Mastercard - American Express - Paypal - Paypal in 3 rate - Bonifico Bancario.
Shipping throughout Europe
Fast and trackable shipping. Your satisfaction, our commitment!
New products with warranty
All products on our site are new and covered by warranty.
Are you a company?
Please register as a Professional Account to enable all data.
Description

Grundfos pressure booster pump for domestic use UPA 15-90 Cod. 99538895

Grundfos UPA 15-90 pump

Product code 99538895

Grundfos UPA 15-90 is a domestic booster designed to increase the pressure of drinking water supplied from an external source in residential homes. UPA booster pumps increase the pressure of domestic water to make the required pressure available at showers, taps and other withdrawal points.

This pump has a 3/4 inch inlet and outlet port. The pressure rating of the pump corresponds to PN 10 and a port-to-port length of 160 mm. The UPA 15-90 offers the comfort of constant water pressure with automatic start and stop. This is controlled by the integrated flow switch which ensures optimal start/stop of the booster pump based on demand. The design is robust and made with anti-corrosion materials and cast iron pump body with cataphoresis coating to ensure long life. The pump is of the box rotor type where the pump and motor form an integral unit without a shaft seal. This pump must always be installed with a horizontal drive shaft. This booster has a 2-pole asynchronous squirrel cage motor with built-in impedance protection and short circuit proof. The bearings are lubricated by the pumped liquid. These construction features guarantee maintenance-free operation. The pump has the following CE, WEEE-UPA and MORO approvals.

  • Integrated flow switch: automatic start and stop based on demand

  • Low noise level

  • Easy installation: Compact plug and pump inline booster

  • Integrated non-return valve

  • Better corrosion resistance

  • Integrated engine protection

TECHNIQUES
Nominal flow rate 0.98 m³/h
Prevalence 5,462 m
TF class 95
Approvals CE, WEEE-UPA, MORO

MATERIALS
Body Pump Cast iron, EN 1561 EN-GJL-150
Impeller Composite, PP-GF30

INSTALLATION
Ambient temperature limit 0 .. 40 °C
Max operating pressure 10 bars
Connection type G
Size attack 3/4 inch
Nominal pressure of the connection PN 10
Wheelbase 160 m

LIQUID
Pumped liquid Waterfall
Liquid temperature range 2 .. 95 °C
Liquid temperature during operation 60°C
Density 983.2 kg/m³

ELECTRICAL DATA
Max power absorbed 120W
Network frequency 50Hz
Nominal tension 1 x 230V
Maximum current consumption 0.48 A
Capacitor capacity - running 2.5 µF
Protection class (IEC 34-5) X2D
Insulation class (IEC 85) H
Integrated motor protection IT IS NOT
Power plug Schuko plug

OTHER
Net weight 2.66kg
Gross weight 3.77kg
Packaging volume 0.004 m³
Nation of origin CN
Agreement rate no. 84137030
Data sheet
99538895
5713830738429
CURVE
file_1763564373.4262.png
DIMENSIONS
file_1763564379.9655.png
SEARCH ADDITIONAL INFORMATION

For additional information and technical data sheets, click the link and enter the identified product code in the search bar.

SEARCH TECHNICAL DATA SHEETS AND INFORMATION

You might also like
chat Comments (0)