Arexons System TZ 226 cold galvanizing 400 ml cod. 4226
- Cathodic Protection: The high content of pure zinc prevents corrosion by acting as a sacrificial anode, protecting the underlying metal.
- Extreme Resistance: Designed to resist atmospheric agents, salt and high temperatures (up to 300°C).
- Professional Finish: Ideal for colour-matching and protecting welds, holes and repairs on hot-dip galvanised products.
- Overpaintable: Once dry, it can be used as a protective primer or left as a final zinc grey finish.
Give iron the strength of steel and forget the threat of rust with just one professional spray.
Visa - Mastercard - American Express - Paypal - Paypal in 3 rate - Bonifico Bancario.
Fast and trackable shipping. Your satisfaction, our commitment!
All products on our site are new and covered by warranty.
Please register as a Professional Account to enable all data.
Arexons TZ 226: The Ultimate Metal Shield Against Corrosion
Rust never sleeps, especially on welds and cuts where the metal's original protection has been removed. Arexons System TZ 226 Cold Zinc Coating (code 4226) is the professional solution for restoring the original protective barrier. Thanks to its high-purity formula, it doesn't just coat the iron, but electrolytically bonds to the surface to prevent oxidation from occurring.
Why choose Zincante TZ 226 for your projects?
There are many gray spray paints on the market, but few can match the technical properties of the Arexons system. Choosing this product guarantees structural advantages:
- High Coverage Power: A thin film is sufficient to create an impenetrable barrier to humidity and oxygen.
- Quick Drying: Dries to the touch in minutes, allowing you to move pieces without ruining the finish.
- Tenacious Adhesion: Does not flake or crack over time, maintaining its effectiveness even on structures subject to vibrations or temperature changes.
- Industrial Versatility: Essential for the maintenance of tanks, pylons, pipes, heavy carpentry and industrial bodywork.
Technical Specifications
400 ml spray format. Standard zinc gray color. Contains over 90% micronized zinc in the dry film. Resistant to salt spray tests and constant operating temperatures up to 300°C.
How to use
- Clean the metal surface thoroughly, removing any loose rust residue with a wire brush or sandpaper.
- Degrease the part well to ensure maximum adhesion of the pigment.
- Shake the can vigorously for at least 2 minutes (the ball inside must flow freely).
- Spray from a distance of 20 cm with constant crisscross movements.
- Wait 15 minutes between coats if extra protection is needed.
Frequently Asked Questions
Can I paint over Arexons cold zinc?
Absolutely. TZ 226 is an excellent primer. For perfect results, wait at least 12-24 hours for it to dry completely before applying acrylic or synthetic paints.
What is the difference between TZ 226 and other "clear" zinc sprays?
TZ 226 is a pure technical zinc, with a matte gray color typical of industrial zinc plating. Clear sprays have a more aesthetic and glossy appearance, while this one provides maximum corrosion protection.
Does it work on already rusted metals?
Yes, but it's essential to remove loose surface rust. Zinc must come into contact with the living metal to activate cathodic protection.
feedback Report comment