Grundfos Unilift KP250 A1 Steel Submersible Pump Cod. 012H1600
zoom_out_map
chevron_left chevron_right
-59%

Grundfos Unilift KP250 A1 Steel Submersible Pump Cod. 012H1600

Grundfos Unilift KP250 A1 Steel Submersible Pump Cod. 012H1600

Suitable for:

  • Wastewater - Commercial Buildings
  • Domestic waste water
  • Industrial waste water

The UNILIFT KP model is a compact stainless steel submersible pump designed for pumping non-aggressive water and grey water. It can be used as a portable unit or as a fixed installation inside and outside buildings.

€322.51

€264.35 VAT excluded

€786.61 -59%

check Available
100% Secure Payments
Visa - Mastercard - American Express - Paypal - Paypal in 3 rate - Bonifico Bancario.
Shipping throughout Europe
Fast and trackable shipping. Your satisfaction, our commitment!
New products with warranty
All products on our site are new and covered by warranty.
Are you a company?
Please register as a Professional Account to enable all data.
Description

Grundfos Unilift KP250 A1 Steel Submersible Pump Cod. 012H1600

Submersible wastewater pump UNILIFT KP250-A-1

Product code 012H1600

Submersible Drainage Pump

Single-stage stainless steel submersible pump complete with encapsulated motor with insulation class F and built-in thermal overload protection. The pump is supplied with a suction filter, lifting handle, 5 m electric power cable and float switch. The impeller is semi-open with passage of solids up to 10 mm suitable for pumping clear water. The pump has a double mechanical seal consisting of two lip rings. The motor and rotor bearings are cooled by the passage of the pumped liquid through the external volute. The motor is filled with non-toxic liquid.

TECHNIQUES
Max. capacity 3.11 l/s
Max prevalence 7.5 m
Max. Particle 10mm
Approvals CE, RCM, VDE, LGABG, EAC, TUVRHWID, MORO, UKCA, SEPRO
Model TO

MATERIALS
Pump body Stainless steel, EN 1.4301, AISI 304
Impeller Stainless steel, EN 1.4301, AISI 304

INSTALLATION
Ambient temperature limit 0 .. 50 °C
Connection type Rp
Attack size 11/4 inch
Max installation depth 2 m
Installation position Internal

LIQUID
Liquid temperature range 0 .. 50 °C
Density 998.2 kg/m³

ELECTRICAL DATA
Power consumption - P1 480W
Network frequency 50 Hz
Rated voltage 1 x 220-230V
Rated current 2.3 A
Capacitor capacity - running 8µF/400V
Protection class (IEC 34-5) IP68
Insulation class (IEC 85) F
Integrated engine protection CONTACT
Thermal protection internal
Electric cable length 5 m
Cable plug type SCHUKO

OTHER
Level switch Floating
Net weight 6.42 kg
Gross weight 7.11 kg
Packaging volume 0.013 m³
Danish N. VVS 391215025
Country of origin HU
Convention rate no. 84137021
Environmental approval WEEE
Data sheet
012H1600
5700391116575
CURVES AND TECHNICAL DRAWINGS

For additional information and technical data sheets, click the link and enter the identified product code in the search bar.

SEARCH TECHNICAL DATA SHEETS AND INFORMATION

chat Comments (0)