Grundfos submersible pump SB 3-45M Code 92712338
zoom_out_map
chevron_left chevron_right
-49%

Grundfos submersible pump SB 3-45M Code 92712338

Grundfos Submersible Pump SB 3-45M cod. 92712338

Useful to:

  • Increased water pressure for domestic use
  • Rainwater harvesting for domestic buildings

The SB model is a submersible multistage booster system designed for domestic applications. The SB model requires an external control unit such as Grundfos PM1 or PM2 which allows full control of the pump with an intuitive interface.

€576.30 €1,130.00-49% €472.38 (VAT excl.)
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Grundfos Submersible Pump SB 3-45M cod. 92712338

SB 3-45M

Product code: 92712338

Grundfos SB 3-45 M is an all-in-one submersible pump designed for pumping clean water for domestic use and rainwater applications. When submerged the noise emissions are very low, therefore it constitutes a silent alternative to surface-mounted pumps. The pump is constructed of high-quality composite materials and corrosion-resistant stainless steel. SB 3-45 M is equipped with a 15 m power cable and the maximum installation depth is 10 m below the water level, with a liquid temperature ranging from 0 °C to 40 °C. SB 3-45 M is ideal for operation in borehole or onshore tanks, as it easily prevents solid particles from entering the pump. The maximum particle size is 1 mm. The single-phase model is effectively protected from any accidental overloads thanks to the integrated thermal protection. The pump is equipped with integrated thermal protection which immediately stops its operation in case of overheating. Once cooled, the pump automatically restarts when it reaches a normal temperature.

TECHNIQUES
Nominal flow rate3.01 m³/h
Prevalence33.4 m
Max. head 45 m
Impellers3
Max. Particle1 mm
ApprovalsCE, WEEE
Curve toleranceISO9906:2012 3B
Non-return valveNO
Rated transmission speed2800 rpm

MATERIALS
Body Pump Composite, PP - GF30
ImpellerComposite, PPO-20GF

INSTALLATION
Ambient temperature limit-10 .. 50 °C
Type of input connectionSTRAINER
Pump deliveryG 1"
Nominal pressure of the connectionPN 6
Max. depth installation10 m

LIQUID
Pumped liquid Waterfall
Liquid temperature range 0 .. 40 °C
Liquid temperature during operation 20°C
Density998.2 kg/m³
pH value range4-9

ELECTRICAL DATA
Entrance pot. - P1 0.9 kW
Rated power - P20.55 kW
Network frequency50Hz
Nominal tension1 x 220-240V
Rated current4 A
Starting current12 A
So phi0.946
Rated transmission speed2800 rpm
Capacitor capacity - running12 µF/450V
Protection class (IEC 34-5)X8
Insulation class (IEC 85)F
Integrated motor protectionYES
Cable length15 m
Cable typeH07RN-F 3G1
Cable plug typesSCHUKO

CONTROLS
Flow switchNo

OTHER
Net weight 12kg
Gross weight 13kg
Packaging volume 0.033 m³
Danish VVS no391360245
Swedish RSK No5858015
Finnish4822627
N. Norwegian NRF9040079
Nation of originIT
Agreement rate no.84137029
Data sheet
92712338
New product
5715118519003
Curves
file_1663228103.2741.png
Drawings
file_1663228108.6179.png