Grundfos JP 4-47 PT 60L self-priming pump Cod. 99594664
zoom_out_map
chevron_left chevron_right
-37%

Grundfos JP 4-47 PT 60L self-priming pump Cod. 99594664


Grundfos JP 4-47 PT 60L self-priming pump Cod. 99594664

Suitable for:

  • Groundwater collection for domestic use
  • Increase water pressure for domestic use
  • Rainwater harvesting for domestic buildings

JP PT-H is a pressure booster set consisting of a horizontal diaphragm tank and a single-stage, self-priming centrifugal pump. JP PT-H is designed for gardening and domestic applications.

€495.56

€406.20 VAT excluded

€786.60 -37%

check Available
100% Secure Payments
Visa - Mastercard - American Express - Paypal - Paypal in 3 rate - Bonifico Bancario.
Shipping throughout Europe
Fast and trackable shipping. Your satisfaction, our commitment!
New products with warranty
All products on our site are new and covered by warranty.
Are you a company?
Please register as a Professional Account to enable all data.
Description


Grundfos JP 4-47 PT 60L self-priming pump Cod. 99594664

Self-priming pump with pressure switch and expansion vessel JP 4-47 PT-H AA-BBVP

Product code 99594664

The Grundfos JP 4-47 PT-H consists of a Grundfos JP pump, a pressure switch, a pressure gauge, and a 20-liter Grundfos GT-H horizontal diaphragm tank. The booster set features a dual-outlet selection for easy installation and a pressure tank to reduce water hammer in the pipework.

The JP 4-47 PT-H offers the convenience of constant water pressure with automatic start and stop. This is controlled by a combined pressure switch and pressure tank, which ensure optimal start/stop of the booster set based on demand. The pressure tank limits the number of start/stop routines, as the water stored in the tank can be used without starting the pump in the event of low water consumption or leaks. The cut-in pressure is set to 2.2 bar.

The design is robust and constructed of corrosion-resistant materials to ensure a long life. This booster set guarantees optimal self-priming properties, with a suction lift of up to 8 meters. The self-priming pump also ensures stable operation as it can lift liquid from below the inlet level and handle an air-liquid mixture until the pump reaches a fully primed pumping condition.

The JP self-priming pump has a built-in thermal protection that immediately shuts down the pump in the event of overheating. The air-cooled motor features oversized, sealed, and greased-for-life ball bearings to ensure quiet operation and minimal maintenance.


TECHNIQUES
Nominal flow rate4 m³/h
Prevalence41 m
Primary mechanical sealBBVP
ApprovalsEC, EAC
Curve toleranceISO9906:2012 3B
Pump versionTO
Adjustable start pressureY
Cranking pressure2.2 bars
Rated transmission speed2800 rpm


MATERIALS
Pump bodyStainless steel, EN 1.4301, AISI 304
ImpellerPPO-20GF composite
Material codeTO


INSTALLATION
Minimum ambient temperature0 °C
Max. Ambient40°C
Max operating pressurePN 6 bar
Suction pumpG 1 (F)
Pump deliveryG 1 (F)
Connection nominal pressurePN 6


LIQUID
Pumped liquidWaterfall
Liquid temperature range0 .. 40 °C
Liquid temperature during operation20°C
Density998.2 kg/m³


ELECTRICAL DATA
Power consumption - P1840 W
Rated power - P20.55 kW
Network frequency50 Hz
Rated voltage1 x 220-240 V
Rated current3.9 A
Starting current13.2 A
Rated transmission speed2800 rpm
Capacitor capacity - running14 µF/450 V
Protection class (IEC 34-5)IP44
Insulation class (IEC 85)F
Cable length1.5 m
Cable plug typeSCHUKO
Connector typeType E/F (CEE7/7)


OTHER
Tank volume60 l
Net weight30 kg
Gross weight33 kg
Data sheet
99594664
New
5713831612933
CURVES AND TECHNICAL DRAWINGS

For additional information and technical data sheets, click the link and enter the identified product code in the search bar.

SEARCH TECHNICAL DATA SHEETS AND INFORMATION

chat Comments (0)