Self-priming pump Grundfos JP 4-47 PT 20L Cod. 99463875
zoom_out_map
chevron_left chevron_right
-49%

Self-priming pump Grundfos JP 4-47 PT 20L Cod. 99463875

Self-priming pump Grundfos JP 4-47 PT 20L Cod. 99463875

  • Groundwater collection for domestic use
  • Increase water pressure for domestic use
  • Rainwater harvesting for domestic buildings

JP PT-H is a pressure booster set consisting of a horizontal diaphragm tank and a single-stage, self-priming centrifugal pump. JP PT-H is designed for gardening and domestic applications.

€299.37 VAT included €587.00 -49% €245.39 (VAT excl.)
VAT included
check Available

Are You a Company?

To enable the compilation of all data, check the "Company" option in the "Addresses" tab.

New Products with Warranty

All products on our site are new and covered by warranty.

Description

Self-priming pump Grundfos JP 4-47 PT 20L Cod. 99463875

Self-priming high efficiency pump with pressure gauge and expansion vessel JP 4-47 PT-H AA-BBVP

Product code 99463875

Grundfos JP 4-47 PT-H consists of a Grundfos JP pump, a pressure switch, a pressure gauge and a 20-litre Grundfos GT-H horizontal diaphragm tank. The booster set features a double outlet selection for easy installation and a pressure tank to reduce water hammer in the pipework.

JP 4-47 PT-H offers the comfort of constant water pressure with automatic start and stop. This is controlled by the combined pressure switch and pressure tank which ensure optimum start/stop of the booster set according to demand. The pressure tank limits the number of start/stop routines, as the water stored in the tank can be used without starting the pump in case of low water consumption or leakage losses. The cut-in pressure is set to 2.2 bar.

The design is robust and constructed from corrosion resistant materials to ensure a long life. This booster set provides optimum self-priming properties, with a suction lift of up to 8 metres. The self-priming pump also ensures stable operation as it is able to lift liquid from below the inlet level and can handle a mixture of air and liquid until the pump reaches a fully primed pumping condition.

The JP self-priming pump has a built-in thermal protection, which immediately stops the pump in the event of overheating. The motor is air-cooled and equipped with oversized ball bearings, sealed and greased for life to ensure quiet operation and minimal service.

TECHNIQUES
Nominal flow rate 4 m³/h
Prevalence 16.75 m
Primary mechanical seal BBVP
Approvals EC, EAC, UKCA
Curve tolerance ISO9906:2012 3B
Pump version TO
Model TO
Adjustable starting pressure Y
Starter pressure 1.0 - 5.0 bar
Rated transmission speed 2800 rpm

MATERIALS
Pump body Stainless steel EN 1.4301 AISI 304
Impeller PPO-20GF Composite

INSTALLATION
Minimum ambient temp. 0 °C
Max. Ambient 40 °C
Max operating pressure PN 6 bar
Standard hose connection ISO 228-1
Pump suction G 1 (F)
Pump delivery G 1 (F)
Nominal pressure of the connection PN 6

LIQUID
Pumped liquid Waterfall
Liquid temperature range 0 .. 40 °C
Liquid temperature during operation 20 °C
Density 998.2 kg/m³

ELECTRICAL DATA
Power consumption - P1 840W
Rated power - P2 0.55 kW
Network frequency 50 Hz
Nominal voltage [V] 1 x 220-240V
Rated current 3.9 A
Starting current 13.2 A
Rated transmission speed 2800 rpm
Capacitor capacity - running 12µF/450V
Protection class (IEC 34-5) IP44
Insulation class (IEC 85) F
Cable length 1.5 m
Cable plug type SCHUKO
Connector type Type E/F (CEE7/7)

OTHER
Tank volume 20 l
Net weight 15 kg
Gross weight 19 kg
Country of origin HU
Data sheet
99463875
New product
5713829542457
Curves
file_1662037742.8347.png
Drawings
file_1662037756.8722.png