Windshield Ice Remover Spray - Arexons 300 ml
Grundfos UPA 15-90N pump Code 99539041
Grundfos pressure booster pump UPA 15-90N Cod. 99539041
Useful to:
-
Recirculation of hot water for domestic use
UPA is a compact, high efficiency in-line booster pump, designed for residential homes. UPA increases water pressure to required levels in showers, taps and other tap points.
Visa - Mastercard - American Express - Paypal - Paypal in 3 rate - Bonifico Bancario.
Fast and trackable shipping. Your satisfaction, our commitment!
All products on our site are new and covered by warranty.
Please register as a Professional Account to enable all data.
Grundfos pressure booster pump UPA 15-90N Cod. 99539041
Grundfos UPA 15-90 N pump
Product code 99539041
Grundfos UPA 15-90 N is a domestic booster designed to increase the pressure of drinking water supplied from an external source in residential homes. UPA booster pumps increase the pressure of domestic water to make the required pressure available in showers, taps and other withdrawal points.
This pump has a 3/4 inch inlet and outlet port. The pressure rating of the pump corresponds to PN 10 and a connection-to-connection length of 160 mm. The UPA 15-90 N offers the comfort of constant water pressure with automatic start and stop. This is controlled by the integrated flow switch which ensures optimal start/stop of the booster pump based on demand. The design is robust and made with anti-corrosion materials and stainless steel pump housing to ensure long life. The pump is a type of fixed rotor pump in which the pump and motor form an integral unit without a mechanical seal. This pump must always be installed with a horizontal drive shaft. This booster features a 2-pole asynchronous squirrel cage motor with built-in impedance protection and short-circuit proof. The bearings are lubricated by the pumped liquid. These construction features guarantee maintenance-free operation. The pump has the following approvals CE, WEEE-UPA, MORO. This pump is also approved for drinking water.
-
Integrated flow switch: automatic start and stop based on demand
-
Low noise level
-
Easy installation: compact inline plug and pump booster
-
Integrated non-return valve
-
Better corrosion resistance
-
Integrated motor protection
TECHNIQUES |
|
---|---|
Nominal flow rate |
0.98 m³/h |
Prevalence |
5,462 m |
Max. head |
90 dm |
TF class |
95 |
Approvals on the nameplate |
CE, WEEE-UPA, MORO |
MATERIALS |
|
---|---|
Body Pump |
stainless steel EN 1.4308 |
Impeller |
Composite PP-GF30 |
INSTALLATION |
|
---|---|
Ambient temperature limit |
0 .. 40 °C |
Max operating pressure |
10 bars |
Pipe connection |
3/4 inch |
Wheelbase |
160 mm |
LIQUID |
|
---|---|
Pumped liquid |
Waterfall |
Liquid temperature range |
2 .. 95 °C |
Liquid temperature during operation |
60°C |
Density |
983.2 kg/m³ |
ELECTRICAL DATA |
|
---|---|
Max power absorbed |
120W |
Network frequency |
50Hz |
Rated voltage [V] |
1 x 230V |
Maximum current consumption |
0.48 A |
Capacitor capacity - running |
2.5 µF |
Protection class (IEC 34-5) |
X2D |
Insulation class (IEC 85) |
H |
Thermal protection |
Impedance protection |
Power plug |
Schuko plug |
For additional information and technical data sheets, click the link and enter the identified product code in the search bar.
feedback Report comment