Windshield Ice Remover Spray - Arexons 300 ml
Grundfos JP 4-47 PM START self-priming pump Cod. 93294161
Grundfos JP 4-47 PM START self-priming pump Cod. 93294161
Suitable for:
- Groundwater collection for domestic use
- Increase water pressure for domestic use
- Rainwater harvesting for domestic buildings
The JP PM is a booster system consisting of a pressure manager and a single-stage, self-priming centrifugal pump. Designed for a variety of domestic and gardening applications, the JP PM is equipped with dry-running protection.
Visa - Mastercard - American Express - Paypal - Paypal in 3 rate - Bonifico Bancario.
Fast and trackable shipping. Your satisfaction, our commitment!
All products on our site are new and covered by warranty.
Please register as a Professional Account to enable all data.
Grundfos JP 4-47 PM START self-priming pump Cod. 93294161
High efficiency self-priming pump with press control JP 4-47 PM START
Product code 93294161
The Grundfos JP 4-47 START booster consists of a Grundfos JP pump and a pressure manager. The JP 4-47 START offers the convenience of constant water pressure with automatic start and stop, matched to consumption, from the intelligent pressure manager. The pressure switch starts the pump at 1.5 bar, and the pump continues to run as long as there is flow.
The design is robust and constructed of corrosion-resistant materials to ensure a long life. This booster set guarantees optimal self-priming properties, with a suction lift of up to 8 meters. The self-priming pump also ensures stable operation as it can lift liquid from below the inlet level and handle an air-liquid mixture until the pump reaches a fully primed pumping condition.
The JP 4-47 PM START incorporates dry-running protection that automatically stops the pump in the event of a dry run. This reduces the risk of pump damage and reduces maintenance costs. The anti-cycling function stops the pump in time in the event of a small leak in the system or if a tap has not been completely closed. When a cycle occurs, the pump stops and an alarm is displayed. A non-return valve to prevent backflow is already integrated.
The JP self-priming pump has a built-in thermal protection that immediately shuts down the pump in the event of overheating. The air-cooled motor features oversized, sealed, and greased-for-life ball bearings to ensure quiet operation and minimal maintenance.
| TECHNIQUES | |
|---|---|
| Nominal flow rate | 4 m³/h |
| Prevalence | 41 m |
| Primary mechanical seal | BBVP |
| Approvals | EC, EAC |
| Curve tolerance | ISO9906:2012 3B |
| Pump version | TO |
| Adjustable starting pressure | No |
| Cranking pressure | 1.5 bar |
| Rated transmission speed | 2800 rpm |
| MATERIALS | |
|---|---|
| Pump body | Stainless steel EN 1.4301 AISI 304 |
| Impeller | Composite, PPO-20GF |
| INSTALLATION | |
|---|---|
| Minimum ambient temperature | 0 °C |
| Max. Ambient | 40°C |
| Max operating pressure | PN 6 bar |
| Suction pump | G 1 (F) |
| Pump delivery | G 1 (F) |
| Connection nominal pressure | PN 6 |
| LIQUID | |
|---|---|
| Pumped liquid | Waterfall |
| Liquid temperature range | 0 .. 40 °C |
| Liquid temperature during operation | 20 °C |
| Density | 998.2 kg/m³ |
| ELECTRICAL DATA | |
|---|---|
| Power consumption P1 | 840 W |
| Nominal power P2 | 0.55 kW |
| Network frequency | 50 Hz |
| Nominal voltage [V] | 1 x 220-240 V |
| Rated current | 3.9 A |
| Starting current | 13.2 A |
| Rated transmission speed | 2800 rpm |
| Capacitor capacity - running | 14 µF/450 V |
| Protection class (IEC 34-5) | IP44 |
| Insulation class (IEC 85) | F |
| Cable length | 1.5 m |
| Cable plug type | SCHUKO |
| Connector type | Type E/F (CEE7/7) |
| OTHER | |
|---|---|
| Net weight | 10 kg |
| Gross weight | 14 kg |
| Convention rate no. | 84137051 |
| Environmental approvals | WEEE |
For additional information and technical data sheets, click the link and enter the identified product code in the search bar.



feedback Report comment